This tutorial is intended to show you the back-end configuraton of the jp Gallerie module. This screenshot shows what it looks like:

The width of module and height of module describe the module's total width and height. The module will stretch to these dimensions irrespective of the image size.

Width of main image: This parameter will specify the width of the main image. The height of the image will be determined by the height of the module. If the image height is greater than the module height, the image will be cut or will not be displayed beyond the height specified for the module.

Width of translucent box: This parameter will specify the width of the translucent box -- the vertical box in the left and right position. The default for the bottom display is 100% wide. 

Slide delay: The speed at which the slides change is specified in milliseconds: 1 second = 1000 milliseconds. So, for a delay of 7 seconds, you would need to write 7000 in this field.

The remaining parameters are settings for each slide. For the image link, you will need to write the full URL starting with http, or relative to your site root: images/stories/myimage.jpg.

It's also worth noting that the width of the right side navigation column will be automatically calculated according top this formula: width of navigation column = width of module - width of main image.